Products & Solutions

Submersible Cables

Rubber 3 & 4 Core Flat Cables – AWG EPDM

Rubber 3 & 4 core flat submersible cables in AWG sizes are designed for deep-well pump power connections. Flexible stranded copper conductors and heavy-duty EPDM rubber insulation and sheath provide resistance to oil, chemicals, ozone, water and mechanical stress.

Cable Construction

Conductor: Finely stranded bare flexible copper conductor
Insulation: EPDM rubber
Sheath: Black or blue heavy-duty EPDM
Core colours: 3 core – Red, Yellow, Black; 4 core – Red, Yellow, Black, Green

Applications

For continuous use in deep wells to supply power to submersible motors at depths up to 500 metres.

Special Features

Meets CENELEC HD 22.1.S2, DIN VDE 0282 Part 810, IEC 245, CEI 20-19, BS 6007 and BS 6899 requirements.
Designed for heavy-duty use.
Excellent resistance to oils, acids, chemicals, ozone and solvents.
Excellent weather resistance and electrical properties.
Temperature range: −40°C to +90°C

EPDM 3 Core Flat Submersible Pump Cables (Without Ground)

Conductor Size (AWG)	No. & Diameter of Wires	Core Diameter (mm)	Nominal Sheath Thickness (mm)	Overall Cable Dimensions (mm)
14	41 × 0.254	3.85	1.15	14.60 × 6.40
12	65 × 0.254	4.50	1.15	16.80 × 7.40
10	105 × 0.254	5.30	1.15	18.70 × 7.90
8	168 × 0.254	6.50	1.40	23.70 × 9.90
6	226 × 0.254	8.00	1.40	28.00 × 11.40
4	420 × 0.254	10.10	2.00	35.50 × 14.70
2	665 × 0.254	11.30	2.00	35.50 × 16.20
1	817 × 0.254	13.60	2.20	45.50 × 18.30
1/0	1045 × 0.254	13.60	2.20	45.50 × 18.30
2/0	1330 × 0.254	15.60	2.20	51.00 × 20.00
3/0	1672 × 0.254	18.00	2.40	60.00 × 23.50
4/0	2116 × 0.254	19.80	2.65	65.00 × 25.00
250 MCM	2503 × 0.254	20.60	2.80	68.00 × 28.00

EPDM 4 Core Flat Submersible Pump Cable (With Ground)

Conductor Size (AWG)	No. & Diameter of Wires	Ground Conductor Size (AWG)	Core Diameter (mm)	Nominal Sheath Thickness (mm)	Overall Cable Dimensions (mm)
14	41 × 0.254	14	3.85	1.15	18.00 × 6.50
12	65 × 0.254	12	4.50	1.15	21.00 × 7.60
10	105 × 0.254	10	5.30	1.15	24.30 × 7.90
8	168 × 0.254	10	6.50	1.40	29.70 × 9.90
6	266 × 0.254	8	8.00	2.00	36.00 × 11.80
4	420 × 0.254	8	10.10	2.00	45.10 × 14.70
2	665 × 0.254	6	11.30	2.20	50.10 × 16.20
1	817 × 0.254	6	13.60	2.20	58.10 × 19.00
1/0	1045 × 0.254	6	13.60	2.20	58.10 × 19.00
2/0	1330 × 0.254	4	15.60	2.20	66.50 × 21.50
3/0	1672 × 0.254	2	18.00	2.65	77.30 × 23.50
4/0	2116 × 0.254	2	19.80	3.85	87.00 × 27.80

Technical Notes

The number of wires is approximate and wire diameter is nominal.
Conductor construction shall satisfy conductor resistance requirements of IEC 60228 / DIN VDE 0295 / IS 8130 / BS 6360.
Specifications may be changed without notice due to continuous improvements in design and manufacturing processes.